Met Hydraulic

MET HYDRAULIC oils were developed with today’s modern hydraulic systems in mind which is toward smaller pumps that deliver fluid at higher pressures than ever before, and while this increases the efficiencies of these systems, it places more stress on the hydraulic fluid because smaller systems tend to operate at higher temperatures. They are formulated with thermally stable base oils to withstand high-temperature operating conditions, resist oxidation, and results in an oil that can yield extremely long drain intervals even under extreme conditions.

MET HYDRAULIC oils surpass the antiwear requirements of all hydraulic pump manufacturers, and in laboratory testing, they can extend piston, vane and gear pumps life beyond that provided by conventional hydraulic oils. They are also more water tolerant than most commodity hydraulic fluids, and studies by Denison, a leader in the manufacturing of Vane and Piston pumps, has found that many hydraulic oils will block filters when contaminated with water due to additive drop-out, but testing has shown that they show minimal filter blockage as demonstrated by the AFNOR filterability test.

MET HYYDRALIC AW 22

MET HYYDRALIC AW 32

MET HYYDRALIC AW 46

MET HYYDRALIC AW 68

MET HYYDRALIC AW 100

MET HYYDRALIC AW 150

MET HYYDRALIC AW 220

MET HYYDRALIC AW 320

MET HYYDRALIC AW 460