FINWORKS 4690

Metalloid Finworks Logo

FINWORKS 4690 is a high performance evaporative HVAC fin stamping lubricant. NSF Approved Food Grade Lubricant (H2)

Benefits

  • Excellent lubrication properties
  • Allows ease of drawing high collars our of lighter gauge thickness fin stock
  • Allows for variances in drawing properties of fin stock
  • Reduces edge wear – lower cleaning and maintenance costs
  • Low toxicity – odorless
  • Excellent corrosion inhibition
  • Low hydrophilic film reduces evaporator blow-off
  • NSF Food Approval

Downloads

FINWORKS 4457

Metalloid Finworks Logo

FINWORKS 4457 is a fin stamping fluid for medium to heavy-duty aluminum, stainless steel, and steel fins. NSF Approved Food Grade Lubricant (H2)

Benefits

  • Outstanding lubricity - Wide range of draw heights from 3 F.P.I. up to 22 F.P.I.
  • Will not interfere with brazing
  • Outstanding tool life
  • Light residue - Non-Staining
  • Odorless
  • Low viscosity
  • Multi metal safe
  • Easy clean off in aqueous wash systems
  • NSF Food Approval

Downloads

FINWORKS 3110

Metalloid Finworks Logo

FINWORKS 3110 is a synthetic lubricant for copper tube bending and expanding, designed to be left in the tubes.

Benefits

  • Low VOC – Less than 1%
  • Soluble with old and new refrigerants
  • Excellent thermal stability
  • Does not form acid within tubes
  • High Miscibility (HFC Refrigerants)
  • No OSHA TLV
  • Low Foaming
  • Good compatibility with mineral oils

Downloads

FINWORKS 4200

Metalloid Finworks Logo

FINWORKS 4200 is an advanced, high performance environmentally advanced HVAC fin stamping lubricant derived from biodegradable, naturally occurring materials. FINWORKS 4200 has excellent lubrication properties, both in metal drawing and in edge wear performance. This allows more forgiveness for drawing higher collars out thinner fin stock and helps compensate for variances in the drawing properties of fin stock acquired from various mill sources. Reducing edge wear yields lower die cleaning and maintenance costs as well as extended life from pierce punches, enhanced louver tooling, slitters, and cutoff blades.

Benefits

  • Outstanding tool life and lubricity
  • Light residue
  • Excellent corrosion inhibition
  • Resistant to formation of microbes
  • Leaves a hydrophilic fin surface
  • Odorless

 

Downloads

FINWORKS 4455

Metalloid Finworks Logo

FINWORKS 4455 is a heavy-duty evaporative fin stamping lubricant.  The unique libricity package of FINWORKS 4455 draws a wide range of collar heights, ranging from 2 F.P.I up to 22 F.P.I.  FINWORKS 4455 is virtually dry to the touch and will not interfere with brazing.  FINWORKS 4455 is multi-metal safe.

Benefits

  • Outstanding tool life and lubricity
  • Light Residue
  • Non-staining
  • Odorless
  • Low viscosity
  • Multi-metal safe
  • Excellent formic acid corrosion package
  • Ash less residue

 

Downloads

FINWORKS 838MW

Metalloid Finworks Logo

Aluminum Fin Stamping Fluid

FINWORKS 838MW is a new generation of fin stamping lubricant, combining a unique blend of additives which are miscible in the new and old generation refrigerants and does not form acids. FINWORKS 838MW is designed to draw a wide range of collar heights.FINWORKS 838MW provides outstanding tool life and a dry-to-touch residue, which does not interfere with brazing. FINWORKS 838MW is also an ideal choice for stamping clam shells and sheet metal.

Benefits

  • Odorless product
  • Miscible in new and old generation refrigerants and compressor oils
  • Dry-to-touch
  • Paintable
  • Ash less brazing
  • Does not form acid

Applications

  • Bending
  • End-Forming
  • Extruding
  • Fin Stamping
  • Metalforming
  • Punching
  • Stamping
  • Tube- Bending

Downloads

CBCL

Metalloid Finworks Logo

CBCL is a synthetic multi-use lubricant from our hi-tech series that can be used to bend copper tubes and Manifold parts. CBCL is miscible with new 410A and old generation refrigerants and does not contain VOCs. CBCL offers excellent thermal stability and is virtually non-hygroscopic, reducing the risk of copper corrosion or sludge precipitation. CBCL is designed to be left in the hairpins and does not require post process cleaning.

Benefits

  • Miscible with old and new generation refrigerants
  • Contains no VOCs
  • Superior tool and die life
  • Low foaming
  • Excellent thermal stability
  • Low floc point
  • Good compatibility with mineral and P.O.E. base compressor oils

Applications

  • Bending
  • Tube- Bending
  • Tube- End-Forming

Downloads