Category Archives: Rod and Bar Processing

METDRAW 5130-HV

Metalloid Wire Logo

METDRAW 5130-HV is a synthetic drawing lubricant designed to form “seamless” tube from all metals. The lubricant offers the ultimate in die life and hydrodynamic separation available. METDRAW 5130-HV is applicable in plug drawing, sinking or mandrel drawing processes. The high viscosity of METDRAW 5130-HV reduces wear and friction especially during multiple draws. METDRAW 5130-HV is completely anneable and ashless. METDRAW 5130-HV is compatible with steel, aluminum, copper or brass tubing and well suited to form large or small diameters.

Benefits

  • Draws all metals
  • 100% anneable
  • Hydrophobic film is impervious to humidity and moisture
  • High speed drawability (3.0 meters/second)
  • Low surface finishes/non-staining
  • 3 year shelf life
  • Draws diameters from half inch to 10 inches in light or heavy wall tubing
  • Suitable for all post heat treatments
  • Excellent “carry thru” for multiple draws
  • Excellent friction modification and antiwear properties

Applications

  • Tube- Bending
  • Tube- Drawing
  • Tube- End-Forming
  • Tube- Expanding
  • Wiredrawing- Wet

Downloads

ADDVANCE 6120

ADDVANCE 6120- USDA Certified Biobased Product - 71%

Ultra Heavy-Duty Synthetic Metalforming Lubricant

ADDVANCE 6120 is an ultra heavy-duty biodegradable metalforming lubricant for the most severest of operations. ADDVANCE 6120 was specifically engineered to replace oil based lubricants in the toughest draws on the hardest metals. ADDVANCE 6120 is a unique, no oil, renewable resource formulation that will provide the operator with benefits that are unattainable with traditional oil based lubricants. This state-of-the art chemistry affords the ultimate in lubricity, personal safety and environmental compatibility. ADDVANCE 6120 provides the benefits of a chlorinated lubricant without the use of chlorinated paraffin. ADDVANCE 6120 is the ideal choice for heavy-duty stamping, blanking and deep drawing operations on all metals including the hardest alloys.

Benefits

  • Outstanding corrosion protection
  • Cleaner/safer press room environment
  • Anti-wear EP package reduces part breakage, galling, tearing and wrinkling.
  • Non-Staining safe on yellow metals
  • Cleans off easily
  • Contains no hazardous materials
  • Excellent die life and anti-wear properties
  • Biodegradable, operator friendly
  • Multi-metal compatible
  • Reduces post finishing costs
  • Eliminates smoke and oil residues
  • Cost-effective - low end use costs

Applications

  • Bending
  • Blanking
  • Deep Drawing
  • End-Forming
  • Extruding
  • Metalforming
  • Piercing
  • Punching
  • Rod & Bar Processing
  • Stamping
  • Tube- Drawing
  • Tube- End-Forming
  • Tube- Expanding

Approvals

  • USDA BioPreferred

Downloads