METDRAW 881 is a synthetic metalworking lubricant that provides maximum barrier lubrication and film forming technologies for light to heavy-duty bending and forming of both ferrous and nonferrous metals.
ADDVANCE 63805 is a heavy-duty biodegradable wire, rod and tube drawing lubricant. ADDVANCE 63805 was specifically engineered to replace oil based lubricants in the toughest draws on the hardest metals. ADDVANCE 63805 is a unique, no oil, renewable resource formulation that will provide the operator with benefits that are unattainable with traditional oil based lubricants. This chemistry affords the ultimate in lubricity, personal safety and environmental compatibility. ADDVANCE 63805 provides the benefits of a chlorinated lubricant without the use of chlorinated paraffin. ADDVANCE 63805 is the ideal choice for heavy-duty stamping, blanking and deep drawing operations on all metals including the hardest alloys.
METDRAW 5130-HV is a synthetic drawing lubricant designed to form “seamless” tube from all metals. The lubricant offers the ultimate in die life and hydrodynamic separation available. METDRAW 5130-HV is applicable in plug drawing, sinking or mandrel drawing processes. The high viscosity of METDRAW 5130-HV reduces wear and friction especially during multiple draws. METDRAW 5130-HV is completely anneable and ashless. METDRAW 5130-HV is compatible with steel, aluminum, copper or brass tubing and well suited to form large or small diameters.
ADDVANCE 5140-HV is a multifunctional “Green” metalforming lubricant made from 100% natural and biodegradable components. ADDVANCE 5140-HV was developed with a focus on personnel and environmental safety. ADDVANCE 5140-HV is an alternative to conventional petroleum based lubricants that may be difficult to work with or have undesirable properties. ADDVANCE 5140-HV was formulated to perform a wide range of metalforming applications and is available in several viscosities for your specific application. Metalloid uses only renewable resources in the ADDVANCE line with a focus on making a global difference.
ADDVANCE 6323 is a water-based vanishing lubricant for light to medium duty forming operations. ADDVANCE 6323 contains NO VOC’s or volatile petroleum solvents. This lubricant is formulated using renewable resources that are both biodegradable and botanical in origin. ADDVANCE 6323 has better evaporative properties than traditional solvent based vanishing lubricants. It will leave a clean, low-residue surface on metal.
ADDVANCE 5430 is a heavy-duty biodegradable metalforming lubricant for severe operations. ADDVANCE 5430 was specifically engineered to replace oil based lubricants in the toughest draws on the hardest metals. ADDVANCE 5430 is a unique, no oil, renewable resource formulation that will provide the operator with benefits that are unattainable with traditional oil based lubricants. This state-of-the-art chemistry affords the ultimate in lubricity, personnel safety, and environmental compatibility. ADDVANCE 5430 provides the benefits of a chlorinated lubricant without the use of chlorinated paraffin. ADDVANCE 5430 is the ideal choice for heavy-duty stamping, blanking and deep drawing operations on all metals including the hardest alloys.
Ultra Heavy-Duty Synthetic Metalforming Lubricant
ADDVANCE 6120 is an ultra heavy-duty biodegradable metalforming lubricant for the most severest of operations. ADDVANCE 6120 was specifically engineered to replace oil based lubricants in the toughest draws on the hardest metals. ADDVANCE 6120 is a unique, no oil, renewable resource formulation that will provide the operator with benefits that are unattainable with traditional oil based lubricants. This state-of-the art chemistry affords the ultimate in lubricity, personal safety and environmental compatibility. ADDVANCE 6120 provides the benefits of a chlorinated lubricant without the use of chlorinated paraffin. ADDVANCE 6120 is the ideal choice for heavy-duty stamping, blanking and deep drawing operations on all metals including the hardest alloys.
METDRAW C-WD is both a biodegradable and biostable copper wire drawing lubricant composed of natural renewable resources. METDRAW C-WD will draw copper or copper clad wire from rod to fine diameters (0.3299-0.0100) clean and stain free. The particle size of the emulsion produces high finish wire with exceptional die life. METDRAW C-WD has low surface tension and high lubricity to reduce down time at high speed production rates.
ADDVANCE MF-127 is designed specifically for the most difficult metalformin operations. It provides high level lubricity performance; which can offset the use of conventional chlorinated additives. This product will enhance
performance in all types of ferrous metalworking applications which utilize a water soluble design. It does not contain petroleum oil, chlorine or sulfur. It is non-toxic and environmentally compatible.
ADDVANCE MF-127 optimizes the botanical content for the most economical design. It may be removed with a mild alkaline spray or warm water rinse.
ADDVANCE 6615 is a heavy-duty biodegradable metalforming lubricant particularly well-suited for severe operations. ADDVANCE 6615 was specifically engineered to replace oil based lubricants in the toughest jobs on the hardest metals. ADDVANCE 6615 is a unique, no oil, renewable resource formulation that will provide the operator with benefits that are unattainable with traditional oil based lubricants. This state-of-the art chemistry affords the ultimate in lubricity, personal safety and environmental compatibility. ADDVANCE 6615 provides the benefits of a chlorinated lubricant without the use of chlorinated paraffin. ADDVANCE 6615 is the ideal choice for heavy-duty forming, stamping, blanking, and deep drawing operations on all metals including the hardest alloys.