Category Archives: Hydroforming

ADDVANCE 5430

ADDVANCE 5430 - USDA Certified Biobased Product - 79%

ADDVANCE 5430 is a heavy-duty biodegradable metalforming lubricant for severe operations. ADDVANCE 5430 was specifically engineered to replace oil based lubricants in the toughest draws on the hardest metals. ADDVANCE 5430 is a unique, no oil, renewable resource formulation that will provide the operator with benefits that are unattainable with traditional oil based lubricants. This state-of-the-art chemistry affords the ultimate in lubricity, personnel safety, and environmental compatibility. ADDVANCE 5430 provides the benefits of a chlorinated lubricant without the use of chlorinated paraffin. ADDVANCE 5430 is the ideal choice for heavy-duty stamping, blanking and deep drawing operations on all metals including the hardest alloys.

Benefits

  • Outstanding corrosion protection
  • Cleaner/safer press room environment
  • Anti-wear EP package
  • Biostable for recirculating systems
  • Non-Staining safe on all metals
  • USDA CERTIFIED 79% BIOBASED
  • Cleans off easily
  • Contains no hazardous materials
  • Excellent die life and anti-wear properties
  • Cost-effective  - low end use cost
  • Reduces post finishing costs
  • Eliminates smoke and oil residues

Applications

  • Stamping
  • Wiredrawing- Wet

Approvals

  • USDA BioPreferred

Downloads

METCHEM 6620

Automotive Approved

METCHEM 6620 is a highly concentrated, synthetic lubricant designed for heavy- duty metalforming operations on ferrous and non-ferrous metals. The unique formulation of   METCHEM 6620 is designed as a base lubricant and sold in pre- determined, specific dilutions depending on application.

Benefits

  • Automotive approved
  • Outstanding corrosion protection
  • Excellent die life
  • Easily cleaned off
  • Weldable

Applications

  • Bending
  • Blanking
  • Deep Drawing
  • End-Forming
  • Extruding
  • Hydroforming
  • Metalforming
  • Piercing
  • Punching
  • Stamping

Approvals

  • Automotive

Downloads

ADDVANCE MF-127

ADDVANCE MF-127 – USDA Certified Biobased Product – 68%

ADDVANCE MF-127 is designed specifically for the most difficult metalformin operations. It provides high level lubricity performance; which can offset the use of conventional chlorinated additives. This product will enhance
performance in all types of ferrous metalworking applications which utilize a water soluble design. It does not contain petroleum oil, chlorine or sulfur. It is non-toxic and environmentally compatible.

ADDVANCE MF-127 optimizes the botanical content for the most economical design. It may be removed with a mild alkaline spray or warm water rinse.

Applications

  • Bending
  • Blanking
  • End-Forming
  • Extruding
  • Hydroforming
  • Metalforming
  • Piercing
  • Punching
  • Roll Forming
  • Stamping
  • Tube- Bending
  • Tube- End-Forming
  • Tube- Expanding

Approvals

  • USDA BioPreferred

Downloads

ADDVANCE 6110

ADDVANCE 6110 - USDA Certified Biobased Product - 72%

ADDVANCE 6110 is an oil free, biodegradable metalforming lubricant composed of renewable resources. The unique ‘botanical green” chemistry affords the ultimate in lubricity, personal safety and environmental compatibility. This state-of-the art formulation provides manufacturing and operator benefits that are unattainable with traditional oil based lubricants. ADDVANCE 6110 is the optimum choice for heavy-duty metal stamping, blanking and deep drawing operations on all metals.

Benefits

  • Outstanding corrosion protection
  • Cleaner/safer press room environment
  • Weldable, heat treatable, ashless
  • Non-Staining safe on yellow metals
  • Cleans off easily
  • Contains no hazardous materials
  • Excellent die life and anti-wear properties
  • Biodegradable, operator friendly
  • Multi-metal compatible
  • Reduces post finishing costs
  • Eliminates smoke and oil residues
  • Cost-effective  - low end use costs

Applications

  • Bending
  • Blanking
  • Deep Drawing
  • End-Forming
  • Extruding
  • Hydroforming
  • Metalforming
  • Piercing
  • Punching
  • Rod & Bar Processing
  • Stamping
  • Tube- Drawing

Approvals

  • USDA BioPreferred

Downloads

ADDVANCE 6030C

Metalloid Botanical Technology Logo

ADDVANCE 6030C is a heavy-duty, high performance, botanical metalworking fluid for machining and grinding of ferrous, non-ferrous and copper alloys. It is virtually non-foaming in high pressure applications. ADDVANCE 6030C has a unique blend of botanical additives and boundary lubricants that provide proven performance on difficult machining and grinding operations. ADDVANCE 6030C is formulated to provide exceptional rust protection. ADDVANCE 6030C is the ideal choice for replacing chlorinated soluble oils used to machine aluminum, especially small hole tapping of aluminum. ADDVANCE 6030C does not contain petroleum oil, chlorine or sulfur.

Benefits

  • Exceptional rust protection
  • Virtually non-foaming
  • Contains no nitrites or phenols
  • Excellent rancidity control
  • Does not leave tacky residue on machine or fixtures
  • Forms stable dilution in hard or soft water

Applications

  • Broaching
  • CNC Machining
  • Drilling
  • Grinding
  • Honing
  • Machining- General
  • Milling- Profiling
  • Reaming
  • Sawing
  • Stamping
  • Tapping
  • Turning

Downloads